DCY280沖壓機
| The main technical parameters | |||
| Total pressure | 310 KN | Output per hour | 273,000 |
| Total tensile force | 282 KN | Carriage stroke | 54 mm |
| Punch Motor Power | 11 KW | Decline rack stroke | 40 mm |
| Machine total weight (including die) | 12,000KG | Die Weight | 800KG |
| Amount of compressed air | 30 m3/h | Stamping beats per minute | 175 primary / min |
| Air pressure | 0.7 Mpa | Punching iron sheets per minute | 6.5～6.8 |
| Total installed power | 17.8KW | Maximum height iron accumulation | 1000mm |
| Total absorbed power | 8.1KW | ||
Stamping machine consists of the following components:
● the material automatically roll plate, on both sides of the sheet;
● electrical driven automatic sheet feeder;
● sheet with waxed roller coating weight control apparatus;
● double plate detectors and mechanical bypass through plate means;
● Optical typographical error detection means;
● plate of the device;
● 27頭dies, carbide cutting tools, will provide the buyer requests a corresponding mold cap dimensions;
● specially designed aerodynamic features with fail-safe clutches and brakes, optional progressive, single-shot, continuous operation procedures;
● stepping forward feed mechanism;
● Punch automatic lubrication unit is equipped with lubrication flow control unit, waste oil recycling system, no oil lubrication alarm system;
● punch shock absorbers damping system (no special foundations);
● drive motor;
● touch-screen programmable logic controller;
● power connection cable
maximum production capacity: 280,000 Crown cap / hour
DCY280 whole punch line floorplan
